Fairbanks VPC
Address
Contact
Hours of Operation
5250 Airport Industrial Road
Follow Airport Way until you are just about to the airport, take the offramp to the south business district.
We are about .7 miles down on the right hand side of the Road. Second building on the right past the post office. Use the 3rd entrance.
The entrance is on the far side of the building with the white bay doors and the blue man door.
We will have a virtual briefing for Turn In appointments every Wednesday starting @ 1400 . Click the link below to join in.
Join by phone - +1-206-207-1700 Access code: 182 463 2388 Meeting Password: bmPgqhte463 (26747483 from phones and video systems)
***APPOINTMENTS START AT THE TOP OF THE HOUR***
Please show up 15 minutes prior to appointment
Cleanliness Guidelines <--- Click here
- Vehicle MUST be UNDER 1/4 TANK OF FUEL. Please do not turn a vehicle in with the gas light on.
- All personal items MUST be taken out of vehicle.
- Vehicle MUST be WASHED prior to inspection as though it has just come from the car wash, VACUUMED and WIPED down thoroughly on the inside, this includes all pet hair (Must be REMOVED)
- E-Brake MUST hold at a minimum 800 rpm.
- Vehicles with any sort of LEAKS will be turned away.
-Make sure to print out the pre-shipping instruction form and the shippers acknowledgement form under the turn in tab at WWW.PCSMYPOV.COM
- Please bring ORDERS, REGISTRATION, AMENDMENTS and TITLE if you have one.
- Please make sure that you have run your VIN to make sure that there are no open RECALLS.
- Lein release is ONLY needed when traveling over seas.
Windshields
No major cracks in the windshield
- No cracks larger than 6"
- No cracks that touch the frame of the windshield
If your vehicle does not meet these requirements, it MUST be replaced.
If the chip has been filled and it is larger than a nickel, the windshield must be replaced.
These requirements are valid for most CONUS locations. If you are traveling OCONUS, please refer to the PPCIG for further guidelines.
Ground Clearance
Your vehicle must have a minimum ground clearance of 4". If your vehicle does not have this, we strongly encourage that you remove any body kits to prevent damage.